features . accuracy, 1.0 fs . volt level output . on-chip amplification and temperature compensations . pre-calibration of offset voltage and span applications . non-invasive blood pressure(nibp)monitors . medical device part number for ordering xfpm - 050kp g r - p1 pressure type gauge pressure model xfpm package configuration dual-in-line-package (dip) model/rated pressure 050kpg(r)-p1 unit recommended operating conditions pressure type gauge pressure rated pressure 300(40) mmhg(kpa) measurable pressure range 0 300(0 40) mmhg(kpa) pressure media non-corrosive gas only excitation voltage 50.25 vdc absolute maximum rating maximum load pressure twice of rated pressure maximum excitation voltage 8vdc operating temperature 40 125 storage temperature 40 125 operating humidity 30 80 (no dew condensation) rh electric performances/characteristics (excitation voltage vcc=5.0v constant, ambient temperature ta=25 ) current consumption less than 10 ma output impedance less than 10 source current less than 0.2 ma sink current less than 2 ma mechanical response time 2 (for the reference) msec full scale span voltage 3.5 v offset voltage 1 0.5 0.1 v full scale span voltage 1 4.0 0.1 v temperature sensitivity of offset(tso) 0.2 v /0 50 accuracy 1,2 1.0 fs/0 50 pre-amplified/5v excitation/gauge xfpm ( nibp ) data sheet measurable pressure range (kpa) part number for ordering 0 50 xfpm-050kpg-p1 XFPM-050KPGR-P1 note ; 1 ) excluding input voltage error. 2 ) excludes offset calibration error and temperature error of offset. prefix (nibp) p1 : accuracy 1.0 fs model xfpm rated pressure(pa) terminal leads direction (see outline diagram) no mark : r: pressure type g : gauge specifications 1
0.5 12 14 15.24(600mil) max 15 2.54 2.54 2.8 6.8 60 1.2 0.5 6 5 4 1 2 3 6 5 4 1 2 3 0.8 4.5 0.6 48 2.2 r1.5 0.25 3 c0.5 labelled faceplate terminal leads pressure port vent hole 15.2 2.54 2.54 6- 0.9(diameter of through holes) 6- 1.8(diameter of lands) 0.5 12 6 5 4 14 48 2.2 r1.5 c0.5 15.24(600mil) max 15 0.25 3 1 2 3 4.5 2.54 2.54 2.8 6.8 1.2 0.5 6 5 4 1 2 3 60 0.8 0.6 labelled faceplate terminal leads pressure port vent hole 15.2 2.54 2.54 6- 0.9(diameter of through holes) 6- 1.8(diameter of lands) xfpm unit (mm) recommended footprint for pcb unit(mm) xfpm-r unit (mm) recommended footprint for pcb unit(mm) pre-amplified/5v excitation/gauge xfpm ( nibp ) data sheet outline dimensions 2
vout c1 c2 gnd vout gnd vcc vcc(dc5v) 0 5 10 15 20 25 30 35 40 45 50 0 1 2 3 temperature temperature error multiplier vout=vs (p + ) (pressure error temperature error multiplier vs) vs=5.0v notes ; output, vout, is not perfectly ratiometric power supply voltage vs. temperature error multiplier=1 remarks : 1)c1 : connect 680pf capacitor within 2cm distance from leads. 2) c2 : connect 0.01 f or more capacitor within 2cm distance from leads. 3) 4 and 5 pins must be no connection. open them as floating ones completely, and do not connect to other line or each other. xfpm note ; please read instruction ?notes? before using the sensor. fujikura reserves the right to change specifications without notice. if you have any questions regarding technical issues or specifications, please contact us. sensor engineering department 5-1 kiba 1-chome, koto-ku, tokyo 135-8512, japan phone +81-(0)3-5606-1072 fax. +81-(0)3-5606-1538 e-mail : sensor@fujikura.co.jp pre-amplified/5v excitation/gauge xfpm ( nibp ) data sheet model pressure range pressure error 1)(mmhg) XFPM-050KPGR-P1 0 +300mmhg 0.00233 0.1 8.57 connection diagram transfer function 3
|
